Savage Octane Conversion Kit 2024 – 23cc Gasline Engine Powered Monster Truck

(3 customer reviews)

$339.99

23 sets sold
SKU: N/A Categories: , , ,

Description

Convert your HPI SAVAGE RC Trucks into a HPI Savage Octane with your Bigger Gas Engine!

This Savage Octane Conversion Kit allows you to use a 23cc or even bigger gas engine on this lengthened 1/8 HPI Savage Chassis.

A Zenoah G230RC gas engine or a Chung Yang CY23RC engine is recommended.

Kit includes:

  • 3mm Thick TVP Main Chassis (Left+Right) – 7075-T6
  • Engine Plate – 7075-T6
  • Engine/Clutch Bell Mount – 7075-T6
  • Throttle Servo Bracket – 7075-T6
  • Steering Servo Bracket and Steering Support – 7075-T6
  • Radio Box Bracket (7075-T6) and Radio Box (Nylon)
  • Battery Box (Nylon) – Internal dimensions: 110x35x22mm (Battery Recommendation 1 2)
  • Center Rear Dogbone 179mm
  • Throttle Control Set
  • Clutch Bell with Bearings
  • 30T Pinion Gear (For Single Speed Center Diff Transmission #XL90013)
    Or 21T Pinion Gear (For HPI Savage Octane 3-Speed Transmission)
  • Screws and Washers

You may need: (Depending on your situation, this list may not be complete)

You Do Not need the items in the list above, if you are converting a stock HPI Savage Octane. All the items in the list are already on your truck. All you need is just a 23cc gas engine as recommended.

Original HPI Savage Octane exhaust pipe on 23cc Engine:

 

 

Note about screws

M6x25 Cap Head Screws: Engine – Clutch Bell Mount
M5x16 Cap Head Screws: Engine – Engine Plate
M4x12 Cap Head Screws: Engine Plate – Side Plates
M4x20 Cap Head Screws: Throttle Servo Bracket – Left Side Plate
M3x8 / M3x10 Cap Head Screws: Side Plates – Steering Servo Bracket and Steering Support/Radio Box/Roll Cage Mount
M3x16 Button Head Screws: Servo – Throttle Servo Bracket
M3x8 Self Tapping Screws: Radio Box Bracket – Radio Box
M3x16 Self Tapping Screws: Radio Box – Radio Box Cover
M3x12 Self Tapping Screws: Side Plates – Transmission Gear Box

 

Size comparison between this 23cc kit and an XL FLUX

The new 23cc Octane Conversion Kit is 40mm longer than the original HPI Savage Octane and the HPI Savage XL Flux. So the wheelbase is 40mm longer than those two biggest Savages from HPI.

 

Additional information

Weight 46 oz
Dimensions 17 × 6 × 6 in
Type

Chassis, Screw, Bearing, Pin & Spring

Pinion

30T, 21T

3 reviews for Savage Octane Conversion Kit 2024 – 23cc Gasline Engine Powered Monster Truck

  1. Zofia (verified owner)

    Very well made kit. I do not know if this kit was machined or cast but never the less this kit surpassed my expectations as I used to be a full time machinist. Everything’s chamfer, no burrs, no pitting and a very nice finish.

    • Team rc4me.US

      Thank you! Nothing is better than customer’s compliment!

  2. Matthew Harrell (verified owner)

    I also agree this kit very well made. machined very well. Very happy with this purchase.

  3. Team rc4me.US

    Submit a 5 star review on Google if you are happy 🙂

    https://g.page/r/CaO7bQOdNXWaECA/review

Add a review

Your email address will not be published. Required fields are marked *

You may also like…